Residential Asphalt Paving in Portland, OR

Your driveway is the first thing you see when you pull in at night and the first thing visitors notice when they arrive. If it’s cracked, sinking, or slowly turning back into gravel, it’s probably time for a fresh start. Affordable Paving is a family-owned paving company that has provided residential asphalt paving throughout the Portland area for more than 25 years.

We install new driveways, replace worn-out ones, and build walkways, patios, and RV pads designed to handle years of Oregon rain. Every project gets the same attention to detail, whether it’s a short driveway apron or a long private drive in the country. You’ll receive a clear written estimate, a dependable crew that shows up when we say we will, and an asphalt surface built to last.

Get a Free Estimate

Get started on your paving project today.

Beautiful white two story brick home. Very colorful photo with blue sky and green grass. Typical new home in the suburbs of the United States. Just one of many home or house photos in our gallery. Portland Asphalt Paving Services

Residential Asphalt Paving Services

We offer a complete range of asphalt paving services for homeowners, with services including:

  • New asphalt driveway installation. We grade the ground, build a properly compacted gravel base, and lay high-quality asphalt at the correct thickness for the vehicles you drive.
  • Asphalt driveway replacement. When cracks and potholes keep returning after every repair, the base underneath has usually failed, so we remove the old asphalt, fix the problem, and pave it fresh.
  • Gravel to asphalt conversions. If you’re tired of ruts, standing puddles, and rocks tracked into the garage, we can turn your gravel driveway into smooth, clean asphalt.
  • Driveway extensions and aprons. When you need room for another vehicle or a wider entrance, we tie the new asphalt into your existing driveway so the finished surface looks like one continuous piece.
  • Asphalt overlays. If your current base is still solid, adding a new layer over the old surface can save you money compared with a full tear-out.
  • Asphalt repair and patching. We fix potholes, sunken areas, and crumbling edges before the damage spreads.
  • Sealcoating. A quality seal protects your asphalt from water, sunlight, and oil stains, and it keeps the surface looking dark and fresh. Learn more about driveway sealcoating.
A close up view of paver edges

More Than Driveways

Asphalt is a smart, low-cost choice for many projects around your property, and our expert team also builds:

  • Asphalt sidewalks and walkways that connect your driveway, front porch, and backyard with a firm, even path.
  • Asphalt patios that give you a simple, budget-friendly outdoor space for grilling and relaxing.
  • RV pads and parking pads built to support heavy trailers, boats, and motorhomes without rutting.
  • Asphalt basketball courts and tennis courts with a smooth, even surface that’s ready for years of play.
Paving contractors spreading asphalt

How Our Asphalt Installation Works

A great-looking driveway starts with the layers you never see, which is why we follow the same careful process on every residential paving project:

  1. Free on-site estimate. We walk the property with you, take measurements, check drainage, and talk through your options before giving you a written quote with no hidden fees.
  2. Excavation and grading. We remove soft soil and old material, then grade the area so water flows away from your home, garage, and foundation.
  3. Base preparation. We install and compact a layer of crushed rock, because this base carries the weight of your vehicles and decides how long the asphalt will last.
  4. Paving and rolling. We place hot-mix asphalt and roll it thoroughly for a dense, smooth finish with clean, straight edges.
  5. Final walkthrough. We inspect the finished work together, clean up the site, and explain exactly how to care for your new asphalt.
Paving crew smoothing out asphalt along a curb to help illustrate commercial asphalt resurfacing

Why Portland Homeowners Choose Affordable Paving

Plenty of paving contractors can lay asphalt, but fewer take the time to get the base and drainage right, and those details decide how long your driveway lasts. Here’s what you can count on when you work with us:

  • More than 25 years of local experience. We know how Portland’s wet winters and heavy clay soils affect asphalt, and we build every driveway with those conditions in mind.
  • Family-owned and honest. You’ll work directly with people who care about their name in the community, not a distant call center.
  • Licensed and insured. Our Oregon contractor license is CCB#187559.
  • Fair, clear pricing. We keep costs reasonable without cutting corners on materials or preparation.
  • Quality results that last. We’d rather do the job right the first time than come back later to fix avoidable problems.

“Showed up on time. Great work crew. Very efficient and did a great job. Highly recommend them.” — Lynne F.

Read Our Reviews

Road roller making new road with asphalt

What Does a Residential Asphalt Driveway Cost?

Every property is different, so we price each project after we’ve seen the site in person. Most asphalt driveways are priced by the square foot, and the final cost usually depends on these factors:

  • The overall size and shape of the paved area
  • How much excavation and base preparation the site requires
  • Drainage needs and the slope of the property
  • Whether we’re removing existing concrete, asphalt, or gravel
  • Access for our trucks and paving equipment

In most cases, asphalt costs less to install than concrete and is quicker and less expensive to repair over time. The best way to learn your price is a free estimate, where we’ll give you an honest number and explain exactly what’s included.

The entrance of an office building with a new asphalt driveway and entrance

Residential and Commercial Paving

We’re best known for driveways, but we’re a full residential and commercial paving company. Our commercial clients include local businesses, homeowners associations, churches, and property managers across the region. We handle commercial asphalt paving, parking lot paving, line striping, and private roads. If you manage a parking lot or business property, visit our commercial paving services and parking lot paving pages.

Serving Portland and the Surrounding Area

We’re based in Boring, Oregon, and we proudly serve homeowners across Portland and the surrounding area, including:

Beaverton · Clackamas · Gresham · Hillsboro · Salem · Tigard · Tualatin · Vancouver, WA

Not sure whether we cover your neighborhood? Give us a call, and we’ll let you know right away.

A residential home with a new asphalt driveway

Ready for a New Driveway? Contact Us Today

Whether you need a brand-new asphalt driveway or a simple repair, our experienced team is ready to help. Contact us today to schedule a free, no-pressure estimate.

Residential Asphalt Paving FAQ

How much does an asphalt driveway cost in Portland?

The cost depends on the size of the driveway, how much base work it needs, and how easily our equipment can reach the site. Most residential driveways are priced by the square foot, and we provide free written estimates so you know the actual number before any work begins.

Is asphalt or concrete better for a driveway?

Asphalt typically costs less to install and is much easier to patch when problems appear. It also handles freeze and thaw cycles well because it flexes slightly instead of cracking. Concrete can last longer but costs more and is harder to repair, so for most Portland homes, asphalt gives you the better value.

How long does an asphalt driveway last?

A properly installed asphalt driveway often lasts 20 years or more. The quality of the base, good drainage, and regular sealcoating make the biggest difference, and skipping any of those can cause even new asphalt to fail early.

How long before I can drive or park on new asphalt?

Wait at least two to three days before driving on new asphalt, and a little longer during hot weather. For the first few weeks, avoid parking heavy vehicles in one spot or turning your steering wheel while the car is stopped. We’ll give you simple care instructions when the job is finished.

When should I seal a new asphalt driveway?

New asphalt needs time to cure before it’s sealed. Most driveways are ready for their first sealcoat six months to a year after paving, and resealing every two to three years after that helps protect against water and sun damage.

How thick should an asphalt driveway be?

Most residential driveways need about two to three inches of compacted asphalt on top of a solid gravel base. If you regularly park an RV, boat, or work truck, we’ll recommend a thicker build to handle the extra weight.

Can you pave over my old driveway or gravel?

Sometimes. If your existing asphalt still has a stable base, an overlay can work well and save money. Gravel driveways usually need grading and a new base layer first, and we’ll explain honestly which option makes sense for your property.

Do you use recycled asphalt or millings?

Millings can work for rural driveways and low-traffic areas, but they don’t provide the smooth, sealed finish of hot-mix asphalt. For most homes, we recommend hot-mix asphalt for a cleaner look and longer life.

Do you work with businesses too?

Yes. We provide commercial asphalt paving, parking lot paving, line striping, and asphalt repair for businesses, homeowners associations, and property managers.